Publicidad
Idiomas disponibles
Idiomas disponibles
FOR BRAZIL MODELS ONLY:
1. Turn jar upside down so the small opening is at the top. Place sealing ring over jar opening.
2. Turn the integrated blade assembly with threaded jar bottom upside down and place into the
bottom of the jar. Turn clockwise while pushing down to tighten. Be sure the integrated blade
assembly with threaded jar bottom is locked securely to the jar before use.
3. Place the jar onto the base.
Left
Stop
®
C
®
ALWAYS HOLD JAR WITH ONE HAND WHILE PROCESSING!
1.
TIGHTENING THE JAR
A
B
Right
Stop
Jar
Lug
®
Motor
Base
D
®
2.
3.
A. To tighten jar bottom, put assembled jar
securely into motor base ring with handle
and lug in front of the right stop.
B. Using jar handle, turn jar to the left as
far as possible. This insures that the jar
bottom is tightened properly.
C. To operate blender, place assembled jar
in motor base ring with jar lug against
flat side of the motor base stop. If jar lug
does not rest against flat side of right stop,
remove jar assembly and place against
flat side of left stop. Seat jar firmly and
operate.
D. To remove jar, lift straight up. (If it is not
easily removed, rock gently and lift up, do
not twist). If jar bottom cannot be loosened
by hand, place assembled jar into motor
base ring with handle in front of left side
stop. Using handle, turn jar to right until jar
bottom loosens.
Do not attempt to place the jar on or
attempt to remove it from the motor base
while the motor is running.
E n g li s h - 5
Publicidad
