Descargar Imprimir esta página

Kenmore 30 Manual De Instrucciones página 2

Ocultar thumbs Ver también para 30:

Publicidad

Idiomas disponibles

Idiomas disponibles

Important
Notes
to the
Installer
I.
Read all instructions contained in these installation
instructions before installing the cooktop.
2.
Remove all packing material before connecting the
electrical supply to the cooktop.
3.
Observe all governing codes and ordinances.
4.
Be sure to leave these instructions with the consumer.
5.
Note: For operation at 2000 ft. elevations above see
level, appliance rating shall be reduced by 4 percent
for each additional 1000 ft.
Important
Note to the Consumer
Keep these instructions with your Use and Care Guide for
future reference.
IMPORTANT
SAFETY
INSTRUCTIONS
Installation of this cooktop must conform with local codes
or, in the absence of local codes, with the National Fuel
Gas Code ANSI Z223.1/NFPA 54 in the United States, or
in Canada, with the Canadian Fuel Gas Code, CAN/CGA
B149 and CAN/CGA B149.2.
When installed in a manufactured (mobile) home
installation must conform with the Manufactured Home
Construction and Safety Standard, title 24 CFR, part
3280 [Formerly the Federal Standard for Mobile Home
Construction and Safety, title 24, HUD (part 280)] or,
when such standard is not applicable, the Standard for
Manufactured
Home Installation, ANSI/NCSBCS A225.1
or with local codes where applicable.
This cooktop has been design certified by CSA
International. As with any appliance using gas and
generating heat, there are certain safety precautions you
should follow. You will find them in the Use and Care
Guide, read it carefully.
• Be sure
your
cooktop
is instaJJed
and grounded
properly
by a qualified
installer
or service
technician.
This cooktop
must
be electrically
grounded
in
accordance
with
local
codes
or, in their
absence,
with
the National
ElectricaJ
Code ANSI/NFPA
No.
70--latest
edition
in the
United
States,
or in
Canada,
with
the Canadian
Electrical
Code, CSA
C22.1 Part 1.
• The burners
can be lit manually
during
an
electrical
power
outage.
To light
a burner,
hold
a
lit match
to the
burner
head,
then
slowly
turn
the
Surface
Control
knob
to MTE. Use caution
when
lighting
burners
manually.
• Do not store
items
of interest
to children
in
cabinets
above
the cooktop.
Children
could be
seriously
burned
climbing
on the cooktop
to reach
items.
• To eliminate
the need to reach over
the surface
burners,
cabinet
storage
space
above
the burners
should
be avoided.
• Adjust
surface
burner
flame
size so it does
not
extend
beyond
the edge
of the cooking
utensil
Excessive flame
is hazardous.
• Never
use your
cooktop
for warming
or heating
the room.
Prolonged
use of the cooktop
without
adequate
ventilation
can be hazardous.
• Do not store
or use gasoline
or other
flammable
vapors
and liquids
near this or any other
appliance.
Explosions or fires could result.
The electrical
power
to the cooktop
must
be shut
off while
gas line connections
are
being
made.
FaiJure to do so could
resuJt
in serious
injury
or death.

Publicidad

loading

Este manual también es adecuado para:

36