KLIM K2 Manual Del Usuario página 5

INSTALLATION AND DEINSTALLATION
Installation steps
1
Place the film scanner on a steady and flat surface. The
anti-slip silicon should be facing downwards while the PU
leather top should face upwards. Note that the top also
has an orange arrow;
Note: Optionally you can use the included cleaning cloth
to remove any dust from the bottom of the anti-slip
surface for full stability.
2
Open the film scanner by lifting up the upper shell.
3
Insert 2 AA batteries into the battery compartment of
the bottom shell.
4
Flip out the support brackets which are fixed
to the bottom of the upper shell.
Place the upper shell onto the bottom shell by carefully
5
inserting the support brackets into the holes of the
bottom shell whilst having the orange arrow on the top
shell pointed towards the direction of the light plate.
3
ENGLISH