KLIM K2 Manual Del Usuario página 6

Turn the film scanner on and insert your
6
film by sliding it onto the light plate.
Note: Optionally you can use the
included cleaning cloth to remove any
dust and/or fingerprints.
This step is optional and serves for
7
extra stability, especially for larger
smartphones. You can use the included
magnetic phone plate to magnetically
fix your phone to the built-in magnets
in the upper plate. Simply place the
plate between your phone and phone
case.
Place your smartphone onto the top
8
plate with its camera hanging over the
edge so that it aligns with the light
plate.
9
Try to decrease the surrounding light
as much as possible by turning off any
other lights and dimming the windows
as much as possible. Limiting the light
to the film scanner will increase the
quality of your scans.
You are now ready to make your first scan! If you need help with scanning your film,
10
please refer to the section "Scanning" on the next pages.
Deinstallation steps
1 Make sure that the power switch is turned off.
To fold the film scanner gently pull up the upper shell from the bottom shell.
2
Fold in the support brackets. Each support bracket has a number on the side
3
indicating in what order they need to be folded back.
Place the upper shell back on the bottom shell.
4
ON
OFF
4