cecotec FOLDING Manual De Instrucciones página 14

of the bicycle. Prioritise your safety and use only original spare
parts supplied by the manufacturer or authorised dealer.
- It is important to watch out for wheel rims and to be aware of
any dangerous wear. The wheel rims may suffer from wear
due to various factors, such as knocks, friction or prolonged
use. It is essential to regularly inspect wheel rims for signs
of excessive wear, cracks or damage. If any problems are
observed, they should be addressed immediately to avoid
potential risks while driving.
- WARNING: as with all mechanical components, the E-bike is
subject to wear and tear and high stresses. Different materials
and components can react to wear or fatigue in different
ways. If the service life of a component has been exceeded,
it could suddenly fail, possibly causing injury to the rider.
Any form of cracking, scratching or discolouration change
in highly stressed areas indicates that the component's
lifespan has been reached and it should be replaced.
- WARNING: in composite components, impact damage may
be invisible to the user. The manufacturer must explain the
consequences of impact damage and that, in the event of an
impact, the composite components must be returned to the
manufacturer for inspection or destroyed and replaced.
- It is important to note that composite components can
be affected by high temperatures, especially in confined
environments. It is recommended to avoid exposing the
electric bicycle to intense heat sources such as radiators,
vehicle exhausts or storage in enclosed spaces without
adequate ventilation. Excessive heat can cause deformation,
weakening of materials or even structural failure.
- When installing a child seat on the electric bike, it is essential
to ensure that any springs under the saddle are adequately
covered. This is to avoid the risk of the child's fingers or any
14 FOLDING