Installation; Helpful Tips For Installation; Installation Procedure - koban KIC-1 IP55 Manual Del Usuario

KIC-1 IP55
Sunset switch

Installation

1.

Helpful tips for installation

• Avoid any artificial illumination
sources to aim at KIC-1 IP55
directly such as the connected
lightings (See FIG.1).
• Avoid the shadow to effect on
twilight switch (See FIG.2).
• For a better performance, you
should place the twilight switch
northerly (See FIG.3).
KIC-1 IP55
FIG.1
FIG.2
FIG.3
Instructions manual |
KIC-1 IP55
N
10

Installation Procedure

Please disconnect power
completely and read the instruction
manual carefully before installation.
2. Fix the bottom case on the
proper position with wood
screws .
• Connect the cable as per the
wiring diagram shown in FIG.4.
(Make sure the device is wired
correctly.)
• Fix the top cover with enclosed
screws as FIG.5 Shown.
• Connect the power supply and
set the LUX status according to
the desired light level with LUX
adjustment knob on top cover.
NOTE
The knob of the LUX adjustment is
present at of maximum " "when
out of factory.
www.grupotemper.com