KIC-1 IP55
Sunset switch
Operation
•
If the sunset switch is wired
correctly, the load shall turn
on immediately for about 30
seconds when power supply is
connected.
•
When the ambient light fades
in the evening, the lighting is
switched ON after the LED has
turned ON for about 60 seconds
as soon as the set LUX value is
reached.
•
When the ambient light becomes
brighter in the day, the lighting
is switched OFF after the LED has
turned OFF for about 60 seconds
as soon as the set LUX value is
lower than the ambient light
level.
NOTE
A time delay for 60 seconds prevents
the sunset switch being switched ON
when it is affected by any temporary
influences, such as lighting, passing
car during the night,......,etc.
Automatic/Manual
Operation
The Sunset Switch may be by-
passed for normal " ON/OFF"light
operation at any time under the
following wiring condition (See FIG.7)
Instructions manual |
12
FIG.7
www.grupotemper.com