cecotec CONGA ROCKSTAR 1500 RAY PURE Manual De Instrucciones página 25

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Handle
2. Dirt-tank release tab
3. Dirt tank
Dirt-tank opening button
4.
5. Suction-tube release button
6. Suction tube
7. Vacuum-head release button
Motorised and Mixed brush
8.
9. Power button
10. Battery
11. Battery indicator
12. Mode Selection icon
13. Power adapter
14. Accessory for corners
15. 2-in-1 accessory
16. Wall bracket
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
- This upright vacuum cleaner includes a package designed to protect it during transport.
Take the upright vacuum cleaner out of the box and remove all packaging materials. Keep
the original box and other elements in a safe place, as this will help you prevent damage
to the upright vacuum cleaner when transporting it in the future. In case the original
packaging is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Fully charge the appliance before first use.
- The normal charge time is 5 hours approx. When the battery is fully charged, unplug it.
48
Box content
- Conga Rockstar 1500 Ray Pure vacuum cleaner
- 2-in-1 accessory
- Accessories for corners
- Mixed brush
- Suction tube
- Wall bracket
- Power adapter
- Instruction manual
3. PRODUCT ASSEMBLY
Assembling the suction tube and vacuum head
Fig. 2
- To install the vacuum head into the suction tube, match both parts ensuring the tab on the
vacuum head matches the guides on the tube, and insert the tube into the vacuum head
until firmly fixed.
- To disassemble them, press the vacuum-head release button, and pull from the suction
tube while firmly holding the vacuum head.
Note
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Assembling the suction tube, vacuum head, and main body
Fig. 3
To complete the vacuum cleaner's installation, once the vacuum head is mounted on the
suction tube, hold the tube vertically and insert it into the main body.
Battery assembly
Fig. 4
- Insert the battery in the corresponding slot on the main body. Once inserted, it will click
into place. Make sure it's secured in position.
- To remove the battery, press the release button and remove it.
Note
Remove the battery and store it in a safe, dry place if the appliance is not going to be used in a
long period of time.
ENGLISH
CONGA ROCKSTAR 1500 RAY PURE 49