Descargar Imprimir esta página

MSW -GH-ET-10000 Manual De Instrucciones página 42

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 130
3.3.3
Room ventilation function
Alternatively, the device can be used to ventilate the room. To do this,
first turn off the gas supply. Then, after connecting the plug (C) to the
power socket, set the power switch to the "I" position, and the fan
will be triggered and start to move the air in the room.
3.4.
Cleaning and maintenance
a)
Pull the mains plug and let the unit cool down completely before cleaning,
adjusting or replacing accessories and when the unit is not in use.
Wait until the rotating parts stop.
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
After each cleaning, all the parts should be dried well before the unit is used
again.
d)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
e)
Do not spray the unit with a stream of water or immerse it in water.
f)
Make sure that no water enters through the ventilation openings in the casing.
g)
Clean the ventilation openings with a brush and compressed air.
h)
Perform regular inspections of the unit checking technical fitness and any
damages.
i)
Use a soft cloth for cleaning.
j)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) for
cleaning as they may damage the surface of the appliance material.
k)
Once a year, the device should be checked by a qualified technician.
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
EN
Close the gas valve at the tank, but allow the fan to work
until the flame is extinguished, i.e. do not turn off the
device itself.
When the flame goes out, set the power switch (E) to the
"O" position.
IMPORTANT: never leave the appliance idle with the gas
valve open!

Publicidad

loading

Este manual también es adecuado para:

Msw-gh-et-15000Msw-gh-et-30000Msw-gh-bd-30000Msw-gh-bd-50000