FENTIC SM-1504N Manual De Instrucciones página 17

SECTION 3: CONTROL
IMPORTANT: It is important to clean the appliance before first use or if it has not been used for a
long time. Remove the stickers, protective film and/or plastic from the device. See section 5
cleaning and maintenance for more information.
IMPORTANT: Make sure the appliance is not switched on when you change the attachments.
Remove the plug from the socket.
Place the device on a stable surface. Turn the tilt knob
1
clockwise to tilt the top housing up.
2 Place the splash guard on the housing.
Place the mixing bowl in the housing. Turn the mixing
3
bowl clockwise until it clicks into place.
Choose the desired attachment and attach it to the
attachment point. Turn the attachment counterclockwise
until it clicks into place.
Put the ingredients in the mixing bowl.
4
IMPORTANT: do not add more than 700 grams of dry
ingredients and 500 ml of water together.
IMPORTANT: For heavy dough, fill the bowl to a maximum
of 1/3.
IMPORTANT: water should be between 5-40 °C.
Turn the tilt knob counterclockwise to tilt the top housing
down. Put the plug in the socket and set the speed dial to
the desired speed.
5
After mixing, turn the speed dial to "0". Turn the tilt knob
to tilt the top housing up. Turn the attachment to the right
until it comes loose and turn the bowl to the right until it
can be removed.
16