Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions
ITI WINDOW REQUIREMENTS
• These instructions are for a standard double-hung
window. You will need to modify them for other types
of windows.
• The air conditioner can be installed without the
side curtain if needed to fit in a narrow window.
See the window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within reach of the
power cord.
• Follow the dimensions in the table and illustration
for your model.
I
12" 3!8"
_23
1/4"-36"--
=
(With side curtain)
I
I
FI STORMWINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will keep it
from draining properly.
To adjust for this, attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2"
LENGTH:Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place a
piece of wood on the sill to make it 1/2" higher than
the top of the storm window frame or the vinyl
frame.
Attach securely with nails or screws provided by the
installer.
1/2" higher
than storm
window
frame
Storm window
frame
1/2" higher
than
vinyl
frame
(onsome windows)
AS Wood
P, ,j/j
_ Sill
r_
-
r_
Vinylframe
I I
D PREPARETHE AIR CONDITIONER
r_
Install the top mounting
rail with B Type A
screws from the outside of the case.
Top mounting rail
\
[]
Slide curtain panel into side rails.
rcl
Slide left and right side curtain frames into top
and bottom
mounting
rail. Make sure curtain
snaps into place.
Top left
Top mou_ting rail
Top ight
Bottom mounting rail
8
Publicidad
