Owner's Manual |
Troubleshooting
dle
r.)
Insert one (1) AA battery (not
included) into the battery socket
with the positive terminal facing
nega-
out, then screw on the ignitor
button until tight. Be careful to not
over tighten.
osi-
rner
e.
e-
3-7mm
08
blackstoneproducts.com/support
Assembly Guide
S T E P 0 3
another person, set the griddle
body on its feet.
Use one (1) shear pin and one (1)
cotter pin to attach the propane
tank hanger to the upper bar of the
left leg assembly.
S T E P 0 4
holder on the shaft on the right leg
assembly, and secure it with one (1)
M6x12 screw and two (2) washers.
S T E P 0 5
the OFF position. Insert one (1) AA battery (not included) under the igni-
tion button.
With the help of
Set the paper towel
Install the four (4) control knobs by pushing them into place in
Model 2151