Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
I
NOTE
Ensure enough room in front of the brackets to be able to access the
release clip.
When installing the brackets, note the following, see fig. 2, page 10 to fig. 4,
page 11):
• Observe related technical drawings provided with the order for specific dimen-
sions required, depending on head rail size and restraint type.
• When choosing the installation location of the brackets, ensure that the cords
and the tilt wand available for manually operated blinds are not obstructed.
• Observe sufficient distance to the window recess. Depending on the model,
there must be enough space to close the bracket.
• Ensure that there is sufficient distance from parts of the window so that the blind
can be lowered without obstruction.
• Depending on the model, ensure that there is enough room in front of the brack-
ets to be able to access the release clip.
• Ensure that the brackets do not sit over the tilt mechanisms inside the head rail.
• Ensure that the brackets are close to the edge of head rail for best support.
2
10
Skyvenetian Manual/Powered
5 mm
0.2 in
EN
Publicidad
