Descargar Imprimir esta página

Dometic Oceanair Skyvenetian Instrucciones De Montaje Y De Uso página 43

Estor veneciano

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 135
Skyvenetian Manual/Powered
8.2
Adjusting the blind stop (only for XL with Atlantic or
Pacific motor version)
r
1.
9
Troubleshooting
Fault
Guide wire tension too low
Guide wire blind not running smoothly
Powered blinds:
Blind stops in wrong position
Different blinds running at different speeds
Powered blind does not work
EN
2.
Solution
➤ See chapter "Installation" on page 9.
➤ Check restraint positions and recess
dimensions.
➤ Adjust the automatic stop of the blind,
see chapter "Adjusting the blind stop
(only for XL with Atlantic or Pacific motor
version)" on page 43.
➤ Refer to manual of your control device.
➤ Refer to manual of your control device.
➤ Check the power supply to the blind.
Prolonged or repeated use can activate the
built-in thermal cut-out.
➤ Leave the motor to cool for 30 minutes
and try again.
Troubleshooting
3.
43

Publicidad

loading