Kenmore ELITE 795.7873 Guía Para El Uso Y Cuidado página 24

DURABASE
1. To remove the Durabase, push it back to the end as
much as possible. Tilt up the front of the Durabase and
pull straight out.
2. To install, insert the Durabase in rail assembly.
PULLOUT DRAWER
To separate the drawer, push the front left and right hooks
in (_) direction to pull up and remove.
Then gently lift the gear part of rear left and right side of
the drawer and pull it out in (_) direction.
To install, reposition the gear part of rear left and right
side of the drawer after pulling out both rails as much as
possible, and gently push down both left and right side
while checking the hook on the front part.
DURABASE DIVIDER
The Durabase divider allows you to organize the
Durabase area into sections.
1. To remove, pull the divider straight up.
2. To install, hook the top corners of the divider over the
top edge of the durabase.
_, WARNING: If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to play inside of
drawer.
24