Publicidad
STEP 23
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW
THESE INSTRUCTIONS TO INSTALL THE ANTI‐TIPPING SAFETY BRACKET PROVIDED WITH THIS
PRODUCT.
WARNING
Serious or fatal crushing injuries can
occur from furniture tipover.
To prevent tipover:
* Install tipover restraint provided
* Place heaviest items in the lowest
drawers
* Unless specifically designed to
accommodate, do not set TVs or
other heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tipover restraints may only
reduce, but not eliminate the risk of
tipover
OPTION 1: Attachment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with one of the three holes aligned in
this location. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the hole in
solid back into the stud. Drive the screw through the hole into the wall stud.
OPTION 2: Attachment into drywall
Locate your unit where desired against a wall and mark the wall through one of the three holes, then move your
unit aside. Drill a 3/16" diameter hole (5mm) into the wallboard. Tap the wall anchor into the hole until it is flush.
Move your unit back into the same location. Fasten the dresser to the wall anchor with the screw.
ameriwoodhome.com
11
12
Note:
You have three holes
to use to line up with
a stud.
N
12
32
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safety bracket.
hole
11
stud
wallboard
Publicidad
