Singer SP-550.01 Manual De Instrucciones página 9

CLEANING STEAM PRESS
1. Fill Water Tank with distilled or demineralized water.
2. Place Pressing Cushion in the middle of Ironing Board.
3. Place a clean towel over Pressing Cushion and Ironing
Board.
4. Set Temperature Control Dial to the highest setting
(LINEN).
5. When Steam Ready Indicator Light illuminates, lower
Pressing Plate onto Pressing Cushion.
6. Press Steam Burst Button six times.
7. Allow Pressing Plate to cool.
8. Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this may dam-
age Pressing Plate.
9. Ironing Board Cover is removable for cleaning. Hand wash only with mild detergent.
STORAGE
1. Once pressing is complete, immediately turn On/Off Button "Off" and unplug power cord
from electrical outlet.
2. Allow unit to cool completely (at least 30 minutes).
3. Lower Pressing Plate down, and turn Locking Knob to "Lock" position.
4. Wrap up power cord.
5. Store all accessories safely away, preferably near Professional Steam Press.
6. Store Professional Steam Press in a cool, dry place.
7. For long term storage, empty water from Water Tank.
Using the
Professional Steam Press
ENGLISH – 9