EN
The surface on floor coverings may
contain substances that could be det-
rimental to and soften the rubber feet
of the appliance. If necessary, place a
mat under the feet of the appliance.
Electrical connection
For safe and trouble-free operation of the
appliance, the following instructions on
the electrical connection must be be ob-
served:
Before connecting the appliance,
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. This
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
The mains socket must be protected
by at least a 16 A fuse.
Ensure that the mains cable is undam-
aged and is not laid over sharp edges.
The mains cable must not be pulled
tightly, bent or come into contact with
hot surfaces.
Route the mains cable to prevent risk
of tripping.
The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
Startup
Unpacking
Remove the appliance, all accessory
parts and the user manual from the
box.
Remove all packaging materials and
protective foils from the product and
the accessories before using it for the
first time.
NOTE
►
Never remove the rating plate or any
warning signs on the appliance.
►
Keep the original packaging during
the warranty or guarantee period in
order to return the appliance in the
packaging in the event of a warranty
or guarantee claim. Transport dam-
age will invalidate the warranty or
guarantee.
Checking the delivery contents
Check for visible signs of damage or
missing items.
Report incomplete or damaged con-
tents to your supplier immediately.
Comfort Clean
13