Publicidad
Idiomas disponibles
Idiomas disponibles
POWER SUPPLY
STEP 1: FIT AND CHARGE THE BATTERY
The iBT10 is supplied with a Lithium rechargeable
battery.
NOTE:
Do not use any other type of rechargeable
●
battery with this product.
The battery must be charged for 7 hours
●
before first time use.
Fitting the Battery
IMPORTANT: Before fitting the battery, make
sure the ON/OFF switch on the side of the iBT10
is set to the OFF position.
Take off Belt clip and slide open the battery cover.
Carefully connect the short black (–) and red (+)
lead from the battery to the socket inside the
battery compartment (marked – and +).
Replace the battery cover.
7
Publicidad
