Publicidad
Idiomas disponibles
Idiomas disponibles
Power supply
Charging the Battery
Connect the supplied USB cable, to the USB Type
-C connector on the side of the iBT10. Connect the
other end of the cable to an approved standard
USB 5V mains adapter (not supplied).
Not included
Plug the USB adapter into a mains electrical outlet
socket. The charge indicator LED on the iBT10 will
show RED. This means the battery is charging.
Continue charging until the charge indicator on the
iBT10 shows GREEN. This means the battery is
now fully charged.
Disconnect the USB charging cable from the iBT10.
NOTE :We recommend you also switch off and
remove the USB adapter from the main electrical
outlet socket.
8
Publicidad
