Denon SYS-65HT Instrucciones De Operación página 15

USING THE ACTIVE SUBWOOFER (DSW-65)
1. Set the power switch to the "ON" position.
• When the unit's AC power cord is plugged into a switched AC outlet on the amplifier, if the power switch is left
at the "ON" position, the unit's power turns on and off automatically when the amplifier's power is turned on
and off.
• If the AC power cord is not plugged into a switched AC outlet on the amplifier, set the unit's power switch to
the "ON" position after turning on the amplifier's power. When turning the power off, set the unit's power
switch to the "OFF" position before turning off the amplifier's power.
2. Adjust the volume using the volume adjustment control.
For details, see "PART NAMES AND FUNCTIONS".
REMOVING THE SPEAKER NET (SC-A65, SC-C65)
* The net on the front of the speaker systems (SC-A65, SC-C65) can be removed.
• To remove, grasp both sides of the net and pull forward.
• To mount, line up the holes in the four corners of the speaker net with the projecting pieces in the four corners of
the cabinet and press in.
ENGLISH
15