Panasonic CQ-DF602U Manual De Instrucciones página 21

Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
(1) Select a band and frequency eins O, O and 6 on the previous
page).
(2) Press and hold [P-SET A] or [P-SET VILA] or [V] for more than
2 seconds until the preset number blinks.
(3) Press [P-SET A] or (P-SET VI/LA] or [V] to select a preset num-
ber (1—6).
(4) Press and hold [P-SET A] or [P-SET VILA} or [VA for more than
2 seconds to memorize.
A 7
Manually save a station in o The display blinks once, and a re- | EME GB; Tam
l <$
the preset memory. ceiving station is saved in the
memory.
Manual Preset
Memory
Preset number
Note:
e Frequency setting can be performed even after selecting a preset number.
Entering numbers directly on the remote control unit
G) Select a band and frequency (step @, @ and © on the previous
page).
@) Press and hold {1] to [6] for more than 2 seconds to memorize.
(1) Select a band (steps @ and @ on are
the previous page).
© Press and hold [BAND] (APM) for [FE Tate ate na"
Auto Preset more than 2 seconds.
Memory (APM) e The 6 strongest available stations will be automatically saved in the mem-
, ory under preset number 1 to 6.
Automatically save rela- e Once set, the preset stations are sequentially scanned for 5 seconds
tively strong stations in each. (Scanning)
the preset memory. e Press [P-SET A] or [P-SET VILA] or {V ] for the broadcast you want
to listen to.
(Press [1] to [6] on the remote contro! unit.)
Note:
e New stations are overwritten on existing saved stations after following this procedure.
CD Select a band (steps @ and @ on the previous page).
(Press [1] to [6] on the remote control unit.)