Drip Tray, Drip Cup and LP Tank
9
Slide the drip tray into the bottom of the firebox from the back. (A)
Hang the drip cup clip from the bottom of the drip tray. Make sure the drip drainage hole is on the
right side, as seen from the back of the grill. Place the drip cup into the drip cup clip. (B)
Feed the regulator hose through the hole in the right side panel. (C)
Place the LP tank into the hole on the bottom shelf with the tank collar opening facing to the right as
shown. Raise the tank holder to hold the LP tank securely in place. (C)
When the grill is in the desired location, lock the caster brakes; this will help the grill stay in place for
safe operation. (D)
A
C
CAUTION
Failure to install the drip cup and the drip
cup clip will cause hot fall into the bottom
of the grill with a risk of fire and property
damage.
CAUTION
Failure to install the tank correctly may
allow the gas hose to be damaged
during operation.
28
B
D