Danby Millenium DAR194W/BL Manual Delpropietario página 7

0 eration ControJ
The temperature of the refrigerator is controlled by
setting the thermostat knob. (exterior rear watt of the
cabinet) to the desired setting.
Temperature Se|ection
To start the refrigerator, turn the temperature control
knob, (exterior rear wall of the cabinet) to the position
corresponding to the desired cooling ( on the
graduated blue dial )
Fig A
The refrigerator temperature will vary depending on
the quantity of the food stored and on the frequency
with which the door is opened.
To turn the control to the "OFF" position, rotate the
control knob to the "0" position. If the refrigerator has
been left out of use for some time, set the control to
maximum for 2-3 hours before turning to the desired
position. If the refrigerator is not being used for long
time periods, disconnect the plug and leave the door
partially open. This wilt help to reduce mold/mildew
from accumulating inside the refrigerator cabinet.
* Changes in ambient room temperature will affect
internal refrigerator temperatures (choose correct
setting of the thermostat knob).
* In STOP (0) position the appliance does not operate
(cooling system is switched off), yet power supply is
not interrupted (the light is on, when you open the
refrigerator door).
* Temperature in the refrigerator also depends on
how often the door is opened.
FiG A