Publicidad
Idiomas disponibles
Idiomas disponibles
Split 1x1
IX39B5
NOTE ON LOUVER ANGLES
When using COOL or DRY mode, do not set louver at too vertical an angle far long periods
of time. This can cause water to condense on the louver blade, which will drop on your floor
ar furnishings. (See Fig. 2.2)
When using COOL or HEAT mode, setting the louver at too vertical an angle can
reduce the performance of the unit due to restricted air flow.
Do not move louver by hand. This will cause the louver to become out of sync. lf this occurs,
turn off the unit and unplug it for a
few seconds, then restart the unit. This will reset the louver
2 DESCRIPTION OF PARTS AND FUNCTIONS
Caution: Do not keep louver at too vertical
an angle for long periods of time. This can
cause water condensation to drip on your
furnishings.
CAUTION : Do not put your fingers in
or near the blower and suction side of
the unit. The high-speed fan inside the
unit may cause injury.
USER MANUAL
Fig. 2.2
Fig. 2.3
31
Publicidad
