Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
NOTE:
Make sure unit is assembled
cor-
rectly as shown
in this manual.
Fitting the loop handle
• Position the handle on the shaft. Note
that the handle must be mounted
be-
tween the two arrows
on the shaft.
f
I
• Fit the screw, securing
plate and wing
nut as shown in the diagram.
• Tighten the wing nut.
Fitting the trimmer guard and
trimmer head
• Fit the correct trimmer guard (A) for use
with the trimmer head. Hook the trimmer
guard/combination
guard onto the fitting on
the shaft and secure with the wing nut (B).
_B
I
• Turn the shaft until one of the holes in the
dust cup aligns with the corresponding
hole in the gear housing.
• insert a small screwdriver
(C) into the
aligned holes to lock the shaft.
• Screw
on the trimmer
head (D) in the op-
posite direction
to the direction
of rota-
tion.
• To dismantle,
follow the instructions
in
the reverse order.
Publicidad
