• When loading or unloading this ma-
chine, do not exceed the maximum
recommended
operation angle of 15 °,
• Wear proper Personal Protective
Equip-
ment (PPE) while operating this ma-
chine, including (at a minimum) sturdy
footwear, eye protection,
and hearing
protection.
Do not mow in short and/or,
open toed footwear.
Always let someone
know you are outside
mowing.
IV. SAFE HANDLING
OF GASOLINE
Use extreme care in handling gasoline.
Gasoline is extremely flammable
and the
vapors are explosive.
• Extinguish all cigarettes,
cigars, pipes
and other sources of ignition.
• Use only an approved container.
• Never remove gas cap or add fuel with
the engine running.
Allow engine to
cool before refueling.
• Never refuel the machine indoors.
• Never store the machine or fuel contain-
er where there is an open flame, spark
or pilot light such as a water heater or
on other appliances.
• Never fill containers
inside a vehicle, on
a truck or trailer bed with a plastic liner.
Always place containers
on the ground
away from your vehicle before filling.
• Remove gas-powered
equipment from
the truck or trailer and refuel it on the
ground.
If this is not possible, then
refuel such equipment with a portable
container, rather than from a gasoline
dispenser
nozzle.
• Keep the nozzle in contact with the rim
of the fuel tank or container opening at
all times until fueling is complete.
Do
not use a nozzle lock-open device.
• If fuel is spilled on clothing, change
clothing immediately.
• Never overfill fuel tank.
Replace gas
cap and tighten securely.
V. GENERAL
SERVICE
• Never run a machine inside a closed
area.
• Never make adjustments
or repairs with
the engine (motor) running. Disconnect
the spark plug wire, and keep the wire
away from the plug to prevent acciden-
tal starting.
• Keep nuts and bolts, especially
blade
attachment
bolts, tight and keep equip-
ment in good condition.
• Never tamper with safety devices.
Check their proper operation regularly.
• Keep machine free of grass, leaves, or
other debris build-up. Clean oil or fuel
spillage. Allow machine to cool before
storing.
• Stop and inspect the equipment
if you
strike an object. Repair, if necessary,
before restarting.
• Never attempt to make wheel height
adjustments
while the engine is running.
• Grass catcher components
are subject
to wear, damage, and deterioration,
which could expose moving parts or
allow objects to be thrown. Frequently
check components
and replace with
manufacturer's
recommended
parts,
when necessary.
• Mower blades are sharp and can cut.
Wrap the blade(s) or wear gloves, and
use extra caution when servicing them.
• Do not change the engine governor set-
ting or overspeed the engine.
• Maintain or replace safety and instruc-
tion labels, as necessary.
Serial Number:
Date of Purchase:
Gasoline Capacity / Type:
1.0 Quarts (Unleaded
Regular)
Oil Capacity:
0.58 Quarts
Oil Type (API SG-SL):
SAE 30 (above 32°F) or SAE 10W-30
Spark Plug (Gap: .030")
NGK BPR6ES
Valve Clearance (+ 0.04 mm):
Intake: 0.015 mm; Exhaust: 0.020 mm
Blade Bolt Torque:
36-44 ft. Ibs.
• The model and serial numbers will be found on a decal on the rear of the lawn mower
housing.
Record both serial number and date of purchase in space provided above.
4