It is advised to leave at least 10 cm space all around the appliance to ensure proper ventilation.
It is normal for the appliance's compartment to heat up when it is operating.
You can start placing bottles inside the appliance when it starts cooling, in general 1h after
switching it on.
If your appliance is fitted with casters, then remember that they should only be used for short
movements. Do not move the appliance over long distances on its casters.
Reversing the opening direction of the doors
Before reversing the door opening direction, prepare the following tools and equipment: flat
screwdriver, cross screwdriver, key and elements included in the accessories bag:
Parts needed to reverse the opening direction of the doors
①Door hinge cover
Our wine cellars are delivered with the door opening from left to right. To reverse the opening
direction:
1) Close the door.
2) Remove the door hinge cover ① in the upper right-
hand corner and unscrew the screws on the flange②
Remove the door hinge ③ as well as the top left-hand
cover④.
3) Lift the door until it comes off the lower door
hinge⑤.
1
2
3
②Flange screw
③Door hinge
④Cover
4
5
⑤Lower door hinge