MTD yard-man MESV1300 Manual Del Dueño/Operador página 8

ATTACHING AND REMOVING THE VACUUM BAG
Attaching
1. Attach the vacuum bag to the vacuum bag hook on
the blower/vacuum tube (Fig. 3).
INSTALLING THE SHOULDER HARNESS (Optional)
The shoulder strap is an optional accessory.
1. Push the strap through the center of the buckle.
2. Pull the strap over the cross bar and down through
the slot in the buckle (Fig. 6).
Vacuum Bag Hook
.
Fig. 3
Slide the vacuum bag tube over the debris exhaust
tube on the housing. Push the tube until the latching
tabs on both sides click into place, securing the bag
on the unit (Fig. 4).
__J
Latching Tabs
Debris Exhaust Tube
Vacuum Bag Tube
/_ Clip
Fig. 6
3. Snap the clip on to the support fitting (Fig. 7).
Support Fitting
Fig. 4
Vacuum Bag
Zipper
Removing
1. Press the latching tabs on both sides of the vacuum
bag tube and pull the vacuum bag down from the
unit (Fig. 5).
2. Detach the vacuum bag from the vacuum bag hook.
.
Clip
Fig. 7
While standing in the operating position adjust length
to fit the operator's size. Pull tab to lengthen, pull
strap to shorten (Fig 8).
PRESS IN
Latching Tabs
IN
Fig. 5
Fig. 8