Trigger Lock; Switching ºc/ºf; Hold - Egatronic 51261 Manual De Instrucciones

Oxidized
Opaque

TRIGGER LOCK

To lock or unlock the trigger, follow the below procedures:
1. Press SET to select trigger lock setting, the
2. Press to select ON or OFF.
When the trigger is locked, the Thermometer is on for continues measurement, there is no need
to pull the trigger.
When the trigger is unlocked, user needs to pull the trigger for measurement. When you release
the trigger, the Thermometer will keep hold the measurement result automatically.
SWITCHING ºC/ºF
1. Press SET to choose ºC/ºF selection mode.
2. Press to select ºC or ºF.

HOLD

The display will remain activated 8 seconds after the trigger is released. HOLD appears in
the upper middle of the display. When the trigger is pulled again, the Thermometer will begin
measuring in the last function selected.
Plate
Limestone
Paper (any colour)
Wood, (natural)
Zinc
Glass
Gravel
0.95
Gypsum
0.8-0.95
Ice
0.98
0.98
0.95
Plastic
Soil
0.9-0.98
Water
0.93
0.9-0.95
is blinking.
0.1
0.85
0.95
29