LF PROJECT SOURCE SB30B Instrucciones De Ensamblaje página 8

ASSEMBLY INSTRUCTIONS
7. Place the bumper on the door as shown
Hardware Used
Bumper 2MM
CC
8. Using a phillips head screwdriver, place the
assembly bracket 2 in the desired position with pan
head screw 5/8 as shown in the illustration. Be
careful not to over-tighten as this may damage the
product.
Hardware Used
II Pan head screw 5/8
Assembly bracket 2
KK
9. Assemble the cabinets parts as per the illustration.
Using a phillips head screwdriver, rotate the minifix
cam clockwise to fasten into place. Ensure all cams
are locked into place before moving the cabinet.
7
x 2
8
x 4
x 2
9
8
CC
II
KK