Descargar Imprimir esta página

LF PROJECT SOURCE SB30B Instrucciones De Ensamblaje página 5

Del gabinete base para fregadero

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INFORMATION
• Electric, plumbing, gas lines, and other utilities are frequently installed or embedded behind wall
Where cabinets are being installed. To reduce the risk of shock, explosion or injury, turn off all gas,
Electrical and water connections prior to performing any work. Shut off the power to any appliances
and receptacles in the kitchen including lights at the fuse-breaker box. Use a circuit tester to ensure
the power is off. Failure to follow these instructions may result in property damage and serious or fatal
Injury. If you do not feel confident in your ability to ensure that you will not make contact with utilities
behind a wall during installation, please contact a licensed contractor to install the cabinets.
WARNING
• Prior to starting the installation, ensure you read and understand the entire installation guide.
• At least two people are required for safe installation.
• Screws or fittings are not included. Select suitable screws and fittings that are sufficient to secure the
Cabinets properly to the wall. If you are uncertain, contact lowes customer service. Failure to properly
secure the cabinets may result in serious injury!
• Do not over-tighten connectors (screws, bolts, etc.). Overtightening can lead to product damage.
CAUTION
• Check the inventory you received against the bill of materials you have ordered to ensure all items
Have been delivered. If there are missing or damaged items contact lowes customer service.
• Be sure to check all packing materials carefully for small parts that may have come loose inside the
Carton during shipment. If parts are missing, contact lowes customer service.
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes
Tools required for assembly (not included): list here tools that are required but not included.
Example: wrench, phillips screwdriver, hammer, pliers
5

Publicidad

loading

Este manual también es adecuado para:

Project source sb36b52172125217213