Royal Prestige FRESCAFLOW Guía Rápida página 16

STEP 7
Start up the Royal Prestige
1. Check that all three filter cartridges are in the lock position.
2. Turn on cold water supply and check for leaks.
3. Turn the handle on the "Feed Water Adapter" (J) so that it is parallel with the "White
PE Tubing" and check for leaks.
4. Connect the "Power Adapter" (M) into the power outlet.
5. The system starts flushing automatically for 5 minutes.
DO NOT TURN ON THE ROYAL PRESTIGE
6. Once the 5 minute automatic flush has ended, turn on Royal Prestige
Faucet. Allow the water to run for 30 minutes until the faucet display screen shows
a TDS reading.
Your Royal Prestige
FrescaFlow
®
FRESCAFLOW FAUCET.
®
STEP 8
FrescaFlow is ready to use!
®
FrescaFlow
®