Publicidad
Idiomas disponibles
Idiomas disponibles
20
5
Click the front bar into the plastic
housing and make sure t
is fixed into position.
To remove the bumper bar by
pressing the buttons
located at the sides of the
bottom bumper bar
and lift it up.
6
Place the seat unit on to the
mounting points on the both
side,
push down until the button
located n the holes of the seat
mountings,press the button on
the both side to move the seat
EN
out.
7
Connect the central locking
button restraint system as
shown in FIG. Press the button
to release it.
Sliding adjusters are fitted and
should be carefully adjusted on
each side so the harness fits
your child comfortably
8
Canopy installation: Buckle up
the canopy to the upper
seat frame.
Canopy using: Pull forward the
canopy to stretch the
canopy, and back to fold.
Button
Canopy
buckle
Buckle
Latch
Publicidad
