Settings Menu; Language Choice; Doses Settings; Descaling - LAVAZZA EP 2500 PLUS Instrucciones De Uso

E N
Deactivate now
By pressing OK, the message "DEACTIVATED" is
shown and the counting functions of the processed
litres and of the messages shown on the display are
deactivated.

SETTINGS MENU

The settings menu is reserved to qualified and au-
thorised personnel.
1
Type in the correct password and then press
"Enter". The default password is 333333. If an in-
correct password is entered, the display shows
the following message for 3 seconds:
PW ERRATA
You can navigate between the following items in
the level two menu by using buttons 4 and 5.

Language choice

➤

Doses settings

➤

Descaling

➤
H O Hardness
➤
2
Delta Temp
➤
Change password
➤
Energy saving
➤
Card check
➤
Dispense counter
➤
Water softener counter
➤
LANGUAGE CHOICE
By confirming the "Language choice" item with
"Enter" you can change the menu and display lan-
guage. In fact the lower level menu allows you to
choose the language you want by pressing buttons
4 and 5 and making a choice using the "Enter" but-
ton.
Italiano
➤
English
➤
Français
➤
Deutsch
➤
Espanõl
➤
Português
➤
Nederlands
➤
Press the "Esc" button one or more times to go back
to previous menu levels or to exit the menu.
DOSES SETTINGS
Confirming the "Doses settings" with "Enter" the pa-
26
SETTINGS MENU
rameters of the various selections can be changed,
within the predetermined limits. In fact the lower
level menu allows you to choose the selection you
want to change using buttons 4 and 5.
Product 1
➤
. .
➤
. .
➤
Product 6
➤
The selection of a product with the "Enter" key
shows the following parameters by pressing the
keys 4 and 5:
Offset pump
➤
(allows you to change the pump activation time)
Offset TR1
➤
(allows you to change the hopper activation
time). The item is displayed for all the products
but is active only for the products which require
soluble powder.
DESCALING
Remove the water softener filter, if installed, before
starting the descaling cycle.
The descaling cycle can be activated at any time,
including when the machine does not show it is re-
quired. By confirming the "Descaling" item with "En-
ter", the following message will run across the display.
No more beverages can be dispensed until the cy-
cle has been completed.
At this point follow the instructions.
1
Fill the tank with descaling product diluted in
water according to the quantities indicated in
the instructions.
2
Position as large a container as possible under
the nozzle.
3
Then push "Enter"; the pump will be activated
and the descaling solution will run out through
the nozzle after executing its action inside the
machine's circuit. The display will show the mes-
sage:
DESCALING
INSERT DESCALING PRODUCT
INTO THE TANK AND PRESS OK
CLEANING CYCLE
IN PROGRESS