Alpina YH-23D Instrucciones De Uso página 4

TECHNICAL DATA
Voltage: 220-240V~ 50Hz
Power: 20W
FEATURES:
1. 2 speed settings.
2. Oscillation over a wide angle.
PARTS DIAGRAM
1. Front grill
2. Blade fastener
3. Blade
4. Rear grill fastener
5. Rear grill
6. Motor
7. Oscillation control knob
8. Body
9. Switch panel
10. Base
ASSEMBLY INSTRUCTIONS
1. Unpack the fan and remove all the parts from the package.
2. Attach the body (6, 7, 8, 9) to the base (10).
3. Unscrew the blade fastener (2) from the front of the motor by rotating it
1. clockwise.
4. Unscrew the rear grill fastener (4) from the front of the motor by rotating it
anticlockwise.
5. Position the rear grill (5) against the front of the motor with its handle at the
top, ensuring that the locating pegs on the motor are correctly inserted into the
hole in the grill. Screw the rear grill fastener (4) onto the projecting thread on
the motor front cover by rotating it clockwise until it is firmly tightened.
6. Push the fan blade (3) onto the motor shaft. Then screw on the blade fastener
(2) by rotating it anticlockwise until it is firmly tightened.
7. Attach the logo plate to the front grill (1). Then position the front grill (1)
against the rear grill (5) and join them together.