Descargar Imprimir esta página

Beurer TB 50 Manual De Instrucciones página 21

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
4. INTENDED USE
Only use the device to clean teeth on humans. Do
not use the device on animals! The device is not
suitable for children under 8 years. The device is
only intended for the purpose described in these
instructions for use. The manufacturer is not liable
for damage resulting from improper or careless use.
5. DEVICE DESCRIPTION
The associated drawings are shown on page 3.
Brush head
1
2
ON/OFF/Mode button
Short press: Switches the device on/off
Long press: Changes the mode
3
Mode indicator
Light ring
4
Pressure control
Red light ring: Pressure too high
White light ring: Pressure OK
Charge level indicator
Light ring flashes white: Low battery power
Light ring pulsates white: Battery charging
Light ring permanently white: Battery
charged
Base charger
5
6. USE
6.1 Preparing for use
Charging the electric toothbrush
Fully charge the electric toothbrush before first use.
To do so, proceed as follows:
1. Connect the USB charging cable to the base
charger
a USB port or into a suitable socket using the
supplied adapter.
2. Place the electric toothbrush on the base charger
.During the charging process, the light ring
5
pulsates white (see Figure
electric toothbrush is fully charged, the light ring
illuminates permanently in white.
4
Fitting the brush head
Place the brush head
until it clicks into place.
head
points in the same direction as the ON/
1
OFF/Mode button
. Plug the USB charging cable into
5
1
2
.
A
onto the device from above
B
Make sure that the brush
21
). As soon as the
4

Publicidad

loading