Antar AT52313 Manual De Usuario página 11

joystick
The joystick is mainly used to control the speed and direction of the wheelchair. The farther the joystick is moved from the center position,
the faster it moves
wheelchair. When released, the joystick automatically returns to the center position and the brake automatically applies.
Acceleration/deceleration buttons
When powered on, the speed indicator will indicate the maximum speed of the wheelchair. The maximum speed range indicated by the
number of lights can be adjusted by the user. Each time the acceleration (or deceleration) button is pressed, the speed will increase (or
decrease).
12
Horn
After pressing the button, the horn will sound.
Brake
To brake the electric wheelchair, pull the brake lever back so that it is pressed against the wheels, which will bring the wheelchair to a stop.
When the power wheelchair is in motion (with or without power), ensure that the lever is not pressed against the wheels by pushing the
lever forward (see figure 13).
Seat belt
For your safety, fasten your seat belt whenever you use your wheelchair.
Push the belt in until you hear a click (see figure 14).
Position leverage
Pull the lever to adjust the angle of inclination and return to the standard position (see figure 15).
Footrests
The wheelchair is equipped with two footrests with four-stage angle adjustment and the ability to adjust the appropriate height (see
Figures 16 and 17).
16 17
Ul_AT52313
11
13
14
15