osann Lupo Serie Manual De Instrucciones página 17

Stowage of the 5-point belt for size class 100-150 cm
• Loosen the belt system to the maximum length.
• Open the belt system and remove the belt buckle pad.
• Carefully pull off the cover in the seat area so that you can pass the seat belt buckle through
the opening in the seat cover.
• Open the cover in the back area using the press studs and fold it away forwards.
• Insert the belt buckle tongues into the belt buckle and stow it in the recess in the seat area. To do
this, fi rst remove the two pieces of fi lling material from the recess. Then place the thinner piece
back on the belt buckle in the recess.
• Now stow the shoulder straps together with the shoulder pads behind the lower part of the
headrest cover. The belt buckle pads can also be removed completely. To do this, unhook the
retaining straps of the seat belt buckle pads; these are attached to the metal crossbar at the
rear of the child car seat. You can then pull the belt buckle pads forwards and remove them
completely.
• Now fold back the cover of the back section and close the press studs.
• Ensure that you keep all the parts that are removed in a safe place.
(Sample illustrations)
- 17 -
EN