Bimar TO.23V-2L Folleto De Instrucciones página 18

for damage and do not switch it on unless certain it
is intact: if in doubt, call in qualified staff.
• To avoid all risk of electric shock, never immerse
the plug, the power cord or the appliance in water
or any other liquid.
• Do not pull the power cord or the appliance to
remove the plug from the power socket.
• If the power cable is damaged, it must be replaced
by the manufacturer or its technical support
service, or by a person with similar qualifications, to
prevent all risks.
• This appliance is not intended for operation by
means of an external timer or with a separate
remote control system, to avoid the risk of fire if the
appliance is covered or not correctly positioned.
INSTALLATION
• After removing the packaging, check that the appliance is intact; if in doubt, do not use it and
call in qualified staff. Packaging components (plastic bags, expanded polystyrene, nails, etc.)
must not be left within reach of children since they are potentially hazardous; dispose of them
in accordance with the current law.
Warning: any stickers or advertising leaflets applied to the door, or protective film, must be
removed before the appliance is used.
• Before connecting the appliance, check that the voltage values marked on the nameplate are
the same as those of the electrical mains, and that the power socket is properly earthed (the
manufacturer declines all responsibility arising from failure to comply with this rule). If the
appliance's plug is not compatible with the socket, have the socket replaced with another of
suitable type by qualified staff, who must ensure that the socket's wire gauge is suitable for
the appliance's power draw. Check that there are no other appliances drawing large amounts
18/60