EVVO V517 Manual De Instrucciones página 46

ENGLISH
installation bracket using both quick connectors.
13. Slide the canopy upwards so that all the connections are stored inside it and
screw it to the installation bracket using the 4 screws (2 to each side) removed at
the beginning of the installation process.
Please note
- The reversible blades have 2 different high-quality finishes.
- By inverting the blades, the appliance produces a decorative effect and adapts to
different room designs.
4. OPERATION
Remote control. Fig. 10
1. Power indicator
2. Speed control
3. Power button
4. Timer knob
- The indicator will light up while the appliance is in operation.
- Use the speed buttons to select the air power level: low, medium, or high.
- Press the power button to turn the appliance off.
- Use the timer buttons to select the operating time of the appliance: the fan will
switch off after the selected time has elapsed.
- The remote control is powered by 2 x 1.5V 3AAA batteries.
Pairing the remote control with the fan
Press the power button for 5 seconds until you hear a beep, then press the low-speed
button.
Warnings
- The remote control operates through RF Wireless digital transmission technology.
If the fan is equipped with switch, turn on the fan at top speed before using the
remote control.
- If the fan cannot be controlled through the remote control, check if the batteries
in the remote control are in good conditions and if the make good contact, that
the positive and negative electrodes are in the correct position, and if the batteries
are charged.
- If the fan cannot be controlled through the remote control, check if there are
other remote-controlled appliances in the same area and check if the transmitter
buttons are pressed. Appliances with similar remote-control systems may cause
46
EVVO V517 WOOD/ DARK WOOD