Thor Kitchen ARH Serie Manual página 16

5.1 Surface Maintenance
1. Please clean the range hood surface regularly with warm soapy water and wipe with a cotton cloth to
prevent grease from accumulating.
2. Please do not use harsh cleansers or coarse material to clean the surface because that will damage
the surface.
3. A non-invasive stainless steel polish is recommended to polish the surface after cleaning.
4. Please use soft material for polishing because it will make your range hood surface shinier.
5. Please do not use cleaning solutions that have bleach as an ingredient.
5.2 Surface Cleaning and Maintenance
1. Always disconnect from power supply before cleaning.
2. Clean both exterior and interior of the hood for long lasting. Do not use abrasive cleanser.
3. Make a habit of turning on the hood first before turning on the stove to avoid high temperature in the
kitchen.
6.1 Special Attention when Using the Range Hood
•
The range hood must be turned on every time before cooking to ensure maximum ventilation effect.
•
If there is damage to the power cord, removing and changing the power cord must be handled by the
manufacturer, installer or a qualified electrician.
•
When the range hood, gas stove,or other fuel appliances are being used simultaneously, there must
be good ventilation in the kitchen.
•
If cleaning the range hood is conducted without following the instructions in the manual, you may risk
causing a fire.
•
Do not light a fire directly under the range hood.
•
The exhaust gas from the range hood can't be fed into the exhaust channel of the gas stove or any
other appliances.
•
The minimum distance required between the top of the stove and the bottom of the range hood is
24 inches. If the range installation manual states that more distance are required, it must be taken
into consideration. Adjust range hood to appropriate height for complete emission of exhaust.
•
To avoid danger, parts in the range hood must be disassembled with tools,and not using bare hands.
SURFACE MAINTENANCE
13
CAUTIONS