GE 18 Serie Manual Del Propietário página 19

Remove the Fresh Food Door
V-_Tape the door shut _ith masking tape.
[_Remove the hinge pin _ith a 3/8" socket and rat(:het.
E_Remove tape and tilt the door awW fi'Oln the cabinet. Relnove and save the washer on the hinge pin.
E_Lift the door straight up m fl'ee its bottom socket fl'Oln the pin in the bottom hinge bracket.
E_-Set the door on a non-scratching suK_tce with the out_si(teup.
Reversingthe hardware.
Transfer Bottom Hinge Bracket to the Left
V_Remove the base grille by pulling it
straight out.
[_Using a Totxdriver, move the bottom
hinge bracket and plastic washer fi'om
the tight side to the left side.
Transfer Center Hinge Bracket to the Left
V-_Remove the center hinge bracket t)y
removing the three Tot'S:screws.
NOTE:Keepthesescrews with the hinge bracket,
They are longscrews and will be used wheninstalling the
hingeon the otherside,
_ l Plastic Washer
I°. /
HingeBracket
Do not remove _ I
this sc[ew ........... _ _,,_t
CenterRight _._:_
Remove dm three Totx screws from dm
center left side of din cabinet. Screw dram into dm
holes on dm right side.
Place the center hinge bracket over dm
holes at dm center left side of dm cabinet. Insert
and tighten tim three long screws.
Lo I Donot remove
}.____ this screw
Center [_eft
Transfer Top Hinge to the Left
Interchange hinge and screws at top right with screws at top left of cabinet.
Do not tighten screws on hinge side at this time.
Transfer Door Stops
WOn each (toot', move the metal (toot" stop fi'om the right to the lefL
[_Move any screws fi'om the left to the right.
19