Danfoss RET2001B Guia De Instalacion página 4

Installation Guide
1. Installation Steps
EN
User Guide can be downloaded from: heating.danfoss.com.
1. Installation must be done by an authorised
electrician.
2. The room thermostat should be installed at approx.
1.5 m above oor and where the e ects of sunlight,
draught or other heat sources (eg. TV's) are avoided,
see g. 1 on page 44.
3. First loosen lower retaining screw and carefully
remove back plate, see g. 2 on page 44.
4. Mount back plate direct to wall or on wall box and
wire according to application, see g 3 on page 44 &
g 5 on page 45 according to application.
5. Insert 2x AA Alkaline batteries to front part taking
care to insert correctly as indicated.
6. Locate hooks at top of front part into top of back
plate and lower into position and tighten retaining
screw.
2. Dimensions and Wiring
See g. 4 for dimensions and g. 5 for wiring diagram
on page 45.
4
Danfoss Climate Solutions | AN30483451554601-010102 | 06/2023
RET2001B & TP5001B