Maintaining and cleaning the appliance
Problem
The appliance hardly
picks up any dust and/or
the suction power drops
The cover can not be
closed
If this does not help, contact our customer service. Contact data can be found in the appendix of this
instruction manual (from
The dust bag needs to be replaced
bag".
It is recommended to service the filters at this occasion as well
page 15, „Cleaning or replacing the filter".
Attached nozzle is unsuitable for the floor to be cleaned.
Change the nozzle,
sories".
With the switchable floor nozzle attached, the switch is not in a po-
sition appropriate to the type of floor.
Adjust the position of the floor nozzle switch,
bly and changing of accessories".
Suction power setting is possibly not appropriate to the type of
floor.
Adjust suction power,
This is a safety feature that should prevent the appliance from be-
ing operated without a dust bag inserted.
Be sure to have the correct bag type inserted properly
„Changing the dust bag".
The dust bag is projecting and prevents the cover from closing.
Be sure to have the dust bag inserted fully
the dust bag".
page 101
page 67) or at our website.
Solution
page 15, „Changing the dust
page 14, „Assembly and changing of acces-
page 14, „Adjusting the suction power".
page 15, „Changing
page 14, „Assem-
page 15,
17
17