Electrical Safety
IMPORTANT: Make sure that the electrical circuit is in perfect condition and that the power,
voltage and frequency of the motor are compatible with the power supply. Also, make sure your
power supply is grounded. Connect your log cracker to ground. Never open the ON/OFF switch
box. However, if it is necessary to do so, contact a qualified electrician. Make sure you will
never touch live contacts, specifically when connecting or disconnecting your log clewer. This
machine and its power cord should never come into contact with water. Never use your power
cord to move your cracker. Always unplug the power cord before handling your log clewer. Do
not pull the outlet plug on the cord and protect it against sources of heat, oil, and objects that
may damage it. Do not expose your log splitter to rain or moisture.
CAUTION: Any use of extension cords may cause overheating of this cracker. Make sure the
extension cable is no longer than 10 m. Never use uninsulated or bare wires. The extension
cord should be
Suitable for outdoor use.
76