Publicidad
ASSEMBLING THE BRACKETS
Note: If the light is to be installed on the LH (Left Hand) of a cabinet a LH installation is required. If the light is to be installed on the RH
(Right Hand) of a cabinet, a RH installation is required.
1. Orient one of the mounting brackets [210-1816] (as shown) ensuring that the electrical access screws on the electrical enclosure
[205-3563] are pointed toward the front of the cabinet.
2. Attach the included electrical enclosure [205-3563] to the bracket using the supplied #8 screws [SS344] and lockwashers [203-1068].
LH Installation
SS344
203-1068
210-1816
Electrical
access screws
230-1004
Electrical
access screws
Low voltage
wire connection
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
RH Installation
Tabs always face
cabinet box
Tabs always face
5
SS344
203-1068
cabinet box
Electrical
access screws
230-1004
Electrical
access screws
210-1816
Low voltage wire
connection
Part no. 209-1426 || 09-MAY-2023
Inline™ Tunable Light
Publicidad
