Huion Kamvas Pro 27 Manual De Usuario página 4

Power Button/Display Settings Button
1
Short press: Turn on/off the pen display.

Long press for 3 seconds when the pen display is turned on: Call up the on-screen

adjustment menu (pen-enabled OSD
Indicator Light
2
White light on: Working status

Red light on: Sleep status

Light off: Not connected to power/pen display is not turned on

Slide Switch
3
Slide the switch left or right to disable or enable the finger touch function.
Power Input
4
To connect 19V 3A power adapter for power supply.
Full-functioned Type-C Port
5
To connect a computer that supports the full-featured USB-C cable/transfer handwritten data.
DisplayPort
6
To transmit DisplayPort signals.
HDMI Port
7
To transmit HDMI signals.
3.5mm Headphone Jack
8
To connect a 3.5mm connector.
USB-A Port × 2
9
To connect a USB flash drive, keyboard, mouse, etc.
Built-in Stand
10
Two built-in stands adjustable between 0° to 20° provide the right viewing height and stable
support.
VESA Mounting Hole
11
With the 100 mm × 100 mm VESA hole pattern, you can mount the Kamvas Pro 27 pen display on
a variety of specification-compliant VESA brackets (available at
or arms for flexible adjustment of the angle and position of the pen display.
Note: As the Kamvas Pro 27 pen display weighs approximately 8kg, you should make sure that the bracket or arm
you purchase separately can support the weight, otherwise safety hazards may occur during installation.
4
menu).
HUION
GT2701
Store) or on other brackets
www.huion.com