Huion Kamvas Pro 27 Manual De Usuario página 7

2.3. Stand Installation and Usage
The Kamvas Pro 27 pen display has two built-in stands on the back which can be unfolded for use.
Note:
1. In addition to the built-in stands, with the VESA hole pattern on the back of the pen display, you can also mount
the pen display on a variety of specification-compliant VESA brackets (available at
or arms that allow you to adjust the angle and position more conveniently.
The following takes the installation of the Huion ST100 adjustable stand as an example,
and needs to be purchased separately:
Align the 4 mounting holes of the stand with the 4 VESA mounting holes on the back of the pen display and
①
tighten the screws.
After installation, pull the slider bar to adjust the stand angle (30°-85°).
②
Find a suitable angle and you can start to use the pen display.
③
2. The pen display can be used with a keyboard tray (available at
you to place your keyboard, mobile phone, or other devices.
The following takes the installation of the Huion KH01 keyboard tray as an example,
included and needs to be purchased separately:
Clamp the keyboard tray to a proper position on the pen display;
①
Tighten the screws on the back of the keyboard tray;
②
After installation, you can start to use it together with a keyboard, mobile phone, or other devices.
③
7
HUION Store), or on other brackets
but the stand is not included
HUION Store) or other brackets to make it easier for
but the keyboard tray is not
GT2701
www.huion.com