Publicidad
Idiomas disponibles
Idiomas disponibles
Review this chart to finddo-it-yourself s olutionsforminorperformance problems. Anyservice
needed, o therthanthosedescribed in this owner's manual,shouldbe performed at a Sears
servicecenter.
so could result in electrical shock or personal injury.
Cleaner won't run.
Poor job of dirt pick-up.
1. Unpluggedat wall outlet,
2. Tripped circuit breaker/blown fuse
al household service panel.
3. On/off switch not turned on.
4. Thermal protector tripped.
1. Full or clogged dust bin.
2. Wrong pile heighl setting.
3. Worn agitator.
4. Clogged nozzle or dust bin port,
5. Clogged hose.
6. Hole in hose.
7. Broken/misplaced belt.
8. Hose not inserted fully.
9. Motor proteclion system activated.
10. Dirty filters.
1.
Plugin firmly,push on/off switch to on.
2.
Reset circuit breaker or replace fuse.
3,
Push on/off switch to on.
4.
Reset thermal protector, (page 11)
1,
Clean dust bin. (pages 13. 14).
2.
Adjust setting, (page 7).
3.
Replace agitator,(page 20).
4.
Check CLOG REMOVAL.(page 18).
5,
Check for clogs, (page 18).
6.
Replace hose.
7,
Replace/fix belt, (pages 16, 17).
8,
Insert hose fully, (page 6).
9.
Check for clogs, (page 18).
10.
Clean/change filters, (page 15).
Cleaner picks up
1. Wrong pile height setting.
1,
Adjust setting, (page 7),
moveable rugsor
pushes too hard.
Ught won'twork.
1. Burned out lighl bull).
1.
Change light bulb. (page 19).
Agitatordoes nottam.
1. Broken belt.
1.
Replace belt, (pages 16, 17).
2. Bare floor selector in bare
2.
Move selector to the carpet setting,
Iloor setting.
(page 7).
3. Belt installed incorrectly.
3.
Check BELT CHANGING AND
AGITATORCLEANING. (pages 16, 17).
Pedormance Indicator.
t. Fullor clogged dust bin.
1,
Clean dust bin, (pages 13, 14).
some models, Is red.
2. Dirty tilters.
2.
Clean/change filters,(page 15).
3. Clogged airflow passage.
3.
Clear clog from airflow passage,
(page 18).
4. Certain attachment tools,
4.
This is normal. Light should go off
when tool is removed.
Air flow restrlctod
1. Attaehment use restricts air flow,
1,
Check ATTACHMENTS. (page 9).
with attachmentuse.
2. New carpet fuzz clogged air path.
2.
Check CLOG REMOVAL and clean
Soundchanges,
i
hose, (page 18).
22
Publicidad
